How much Preen or other pre-emergent per square foot?

Enter your area and the label rate to get how much product to apply. Preen Garden Weed Preventer’s label rate is 1 oz per 10 sq ft (6.25 lb per 1,000 sq ft). The label is the law — follow its rate, timing and safety rules.

Enter your measurements

sq ft
Only what you’ll treat: the beds for Preen, or just the grass for a crabgrass preventer (not the house, drive or beds). 100 sq ft is a 10 × 10 ft bed.
Some labels give both — use whichever you like
lb/1,000 sq ft
Pounds of product per 1,000 sq ft. 6.25 is Preen Garden Weed Preventer’s label rate (1 oz per 10 sq ft); for any other product, type the rate on its label
lb
The weight printed on the bag or tub (Preen Garden Weed Preventer comes in 5.625, 13, 16 and 31.3 lb sizes)
More options: Acres
Acres typed here replace the area above (1 acre = 43,560 sq ft). Blank = use the area above
You need10 oz of granules
Granular product
10 oz (0.28 kg)
Bags to buy
1 bag
Product rate
6.25 lb per 1,000 sq ft · 272 lb per acre
How we got this

Label rate 6.25 lb per 1,000 sq ft × 100 sq ft ÷ 1,000 = 10 oz

10 oz ÷ 16 lb bags → 1 bag

  • The label is the law. Use its rate, timing, protective gear and keep-off period; this calculator only does the arithmetic.
  • Most pre-emergents need watering in to work — without water the herbicide sits on the surface (University of Minnesota Extension). The label says how much and how soon.
  • Don’t put a pre-emergent on weak or recently seeded grass — it stops grass seed too (University of Minnesota Extension). The label gives the wait before seeding.

Next: Mulching the beds too? Work out the mulch first, then put the weed preventer on top. For a lawn, measure it in the lawn area calculator.

For this job · affiliate link
Handheld spreaderOn 100 sq ft, a hand-crank spreader is enough. Two half-rate passes at right angles avoid stripes of untreated lawn.
View on Amazon (opens in a new tab)

Product by area (other settings as above)

Product by area (other settings as above)
AreaGranular productBags to buy
50 sq ft5 oz1 bag
100 sq ft10 oz1 bag
200 sq ft1.25 lb1 bag
500 sq ft3.13 lb1 bag
1,000 sq ft6.25 lb1 bag
5,000 sq ft31.3 lb2 bags

Crabgrass preventers and other lawn herbicides are dosed by area, and the label tells you the rate: pounds of granules, or fluid ounces of liquid in so many gallons of water, per 1,000 sq ft or per acre. The calculator does the multiplication for your lawn, or works from an active-ingredient rate if that is what you have. It only does the arithmetic.

How much Preen per square foot?

Preen Garden Weed Preventer’s own directions are to sprinkle it evenly at 1 oz per 10 sq ft (0.1 oz per square foot, or 6.25 lb per 1,000 sq ft) over the soil or mulch around established plants, rake it into the top layer and water it in. Preen Extended Control Weed Preventer is labelled at 0.98 oz per 10 sq ft. Both are bed products for use around listed flowers, shrubs and vegetables, not lawn crabgrass preventers; check the plant list on the bag.

From Preen’s label rate for Preen Garden Weed Preventer. Preen lists its 5.625 lb container as covering 900 sq ft and its 31.3 lb bag as covering 5,000 sq ft. Other brands and formulas have their own rates.
Bed sizePreen Garden Weed Preventer at 1 oz per 10 sq ftIn pounds
10 sq ft1 oz0.06 lb
50 sq ft (a 5 × 10 ft bed)5 oz0.31 lb
100 sq ft (a 10 × 10 ft bed)10 oz0.63 lb
200 sq ft20 oz1.25 lb
500 sq ft50 oz3.1 lb
1,000 sq ft100 oz6.25 lb

The calculator opens set to that rate (granular, 6.25 lb per 1,000 sq ft) and a 10 × 10 ft bed, so type your own bed area, not the lawn. Preen says one application lasts up to about 12 weeks and suggests reapplying every 9–12 weeks for season-long control. It stops seeds from sprouting but does nothing to weeds already growing, so pull those first. The mulch calculator works out the area of rectangles, circles and curvy beds, and Preen can go on top of fresh mulch. Buying the mulch in bags? See how many bags of mulch are in a cubic yard.

The label is the law

The U.S. EPA points out that pesticide labels, unlike most product labels, are legally enforceable: every one carries a statement that using the product in a way its labeling doesn’t allow breaks federal law. So the rate, the maximum per year, the timing, the protective gear and the wait before seeding all come from your label. This calculator does one job (turning that rate into an amount for your area) and every number below is an example only, not a recommendation for any product.

Two ways to work out the amount

Most homeowners work from the label rate: an amount of product per 1,000 sq ft or per acre. Extension guides and turf professionals often work from an active-ingredient (a.i.) rate instead, because it compares products of different strengths. University of Minnesota Extension’s method for converting it: divide the a.i. wanted by the fraction of a.i. in a dry product, or by the pounds of a.i. per gallon in a liquid.

label rate:   product = label rate × area
              (per 1,000 sq ft: × area ÷ 1,000 · per acre: × acres)
granular a.i.: product per acre = lb a.i. per acre ÷ (a.i. % ÷ 100)
liquid a.i.:   gal of product per acre = lb a.i. per acre ÷ lb a.i. per gal
1 acre = 43,560 sq ft · per acre ÷ 43.56 = per 1,000 sq ft
Made-up illustrations of the arithmetic. Your label’s numbers are the ones to use.
Example onlyWorkingResult
Granular, label says 3 lb per 1,000 sq ft, 5,000 sq ft lawn3 × 5,000 ÷ 1,00015 lb
Granular, 0.5 lb a.i. per acre from a 0.5% a.i. product0.5 ÷ 0.005 = 100 lb per acre ÷ 43.562.3 lb per 1,000 sq ft
Liquid, label says 0.75 fl oz in 2 gal of water per 1,000 sq ft, 5,000 sq ft0.75 × 5; 2 × 53.75 fl oz in 10 gal of spray
Liquid, 0.5 lb a.i. per acre from a product with 4 lb a.i. per gallon0.5 ÷ 40.125 gal (16 fl oz) per acre

Mixing a sprayer tank

Liquid labels give the product and the spray volume together, e.g. so many fluid ounces in so many gallons of water per 1,000 sq ft. The calculator totals the spray mix for your area, divides it into tank loads for your sprayer, and gives the product for each full tank. In the third example above, a 1-gallon sprayer needs 10 loads, each with 0.375 fl oz of product — about 2¼ teaspoons (1 fl oz = 2 tablespoons = 6 teaspoons). Amounts that small are why a measuring cup or syringe marked in millilitres, kept only for garden chemicals, is worth having.

The spray volume only works if your sprayer really puts it out at your walking pace. Fill it with plain water, spray a measured 1,000 sq ft (or 100 m²) at a steady pace, and see how much you used; adjust your pace or nozzle until it matches.

Timing and watering in

  • Before the weeds come up. A pre-emergent works on seeds as they germinate. University of Minnesota Extension times crabgrass preventers for before the soil reaches about 55 °F.
  • Water it in. Without water the herbicide stays on the surface and seeds germinate under it; the label says how much water and how soon.
  • Not on new or thin grass. Pre-emergents stop grass seed as well as weed seed. Don’t use them on weak or recently seeded lawns, and check the label for the wait before overseeding — see the grass seed calculator for the seeding side.
  • Some labels allow a split application — two smaller doses weeks apart. The label gives the maximum for the year; add both doses up against it.

Spreading granules evenly

Set the spreader from the label, then check it: weigh the product for a measured 1,000 sq ft strip into the hopper, run the strip, and adjust until it comes out right. Two half-rate passes at right angles hide small errors. Sweep granules off paving and back onto the lawn so they don’t wash into drains. The same routine is described for fertilizer in the lawn fertilizer calculator; weed-and-feed products are dosed by the herbicide, so use this calculator and the label rate for them.

CautionRead the whole label before you buy: some products are for specific grasses only, some are restricted near water or in certain states, and all of them list protective gear. Keep children and pets off treated areas for as long as the label says.

Need the area first? The lawn area calculator adds up rectangles, circles and triangles.

What you’ll need

As an Amazon Associate we earn from qualifying purchases. Links to products are affiliate links — they cost you nothing extra and help keep these calculators free.

Frequently asked questions

How much Preen per square foot?

Preen Garden Weed Preventer’s label rate is 1 oz per 10 sq ft, which is 0.1 oz per square foot or 6.25 lb per 1,000 sq ft. A 10 × 10 ft bed takes about 10 oz. Preen Extended Control is labelled at 0.98 oz per 10 sq ft. Always follow the bag in your hand.

How often should I put Preen down?

Preen says Preen Garden Weed Preventer works for up to about 12 weeks per application and suggests reapplying every 9–12 weeks, sooner in heavy rain, heat and humidity, or on sandy soil. Preen Extended Control is labelled for up to 6 months, up to twice a year.

How do I convert a pre-emergent rate per acre to per 1,000 sq ft?

Divide by 43.56, because an acre is 43,560 sq ft. A label rate of 130 lb per acre is about 3 lb per 1,000 sq ft; 32 fl oz per acre is about 0.73 fl oz per 1,000 sq ft.

How much granular pre-emergent do I need for 5,000 sq ft?

Five times the label rate per 1,000 sq ft. With a label rate of 3 lb per 1,000 sq ft (an example, not a recommendation), that is 15 lb. Choose the rate on your own bag and type it in above.

How do I work out herbicide from the active ingredient percentage?

Divide the active ingredient you want by the percentage as a decimal. For 0.5 lb a.i. per acre from a product that is 0.5% a.i., that is 0.5 ÷ 0.005 = 100 lb of product per acre (University of Minnesota Extension’s method). Never go above the label rate.

Can I overseed after putting down a crabgrass preventer?

Usually not for a while: pre-emergents stop grass seed from establishing too. University of Minnesota Extension advises against using them on weak or recently seeded lawns, and each label gives its own wait before seeding.

Sources